RealLight’s MCO series energy adjustable sub-nanosecond microchip laser with free space output, is composed of integrated electronic control module for energy adjustment, photodetector module and laser drive board.This laser features compact design, plug and play, and free space output with a beam divergence lower than 2mrad.
RealSubns® MCO Series Energy Adjustable Free Space Microchip Laser
PRODUCT PARAMETERS
Optical Parameters | |||||
Wavelength (nm) | 1064 | 532 | 355 | 266 | |
Repetition rate (Hz) | 1~200 | ||||
Max. energy @ Free space output (μJ) | 60 | 30 | 25 | 15 | |
Pulse width (ns) | ≤1 | ||||
Energy stabilty (RMS) | ≤3% | ||||
Adjusting precision of output energy | 1% | ||||
Beam profile (Free space output) | TEM00 | ||||
Full angle divergence Typ. (mrad) | Horizontal @1/e² | ≤2 | |||
Vertical @1/e² | ≤2 | ||||
Polarization | ≥100:1 | ||||
System Parameters | |||||
Supply power voltage | 24V DC | ||||
Modulation input | TTL 0-5V, SMB input | ||||
Control interface | RS-232 | ||||
Peak power consumption (W) | <20 | ||||
Average power consumption (W) | <10 | ||||
Laser dimensions (W×H×L,mm) | 82×102.8×240 | ||||
Operation temperature (℃) | 15~35 | ||||
Storage temperature (℃) | 0~60 |
1. Operation Frequency is 16~200 Hz, in Continous mode or Burst mode.
2. As products are constantly being updated, the right of final interpretation of technical specifications or illustrations in datasheet belongs to RealLight.
3. All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the final data is subject to the final test report.
APPLICATION
-
Laser engraving
-
Laser-induced breakdown spectroscopy (LIBS)
-
Laser photoluminescence
-
Laser marking
-
Laser capture microdissection
-
Laser-induced fluorescence (LIF)
-
Laser mass spectroscopy
-
Ultraviolet microscopy
-
Raman spectroscopy
-
LiADR
-
Thin film scribing and processing
-
Semiconductor inspection
-
Photoacoustic imaging
-
Laser spark plug
- Laser remote sensing
KEY FEATURES
-
Pulse width < 1ns
/ -
Repetition rate variable from 1~200Hz/
-
Energy adjustable by PC control/
-
Photodiode output signal with time jitter < 100ps/
-
Sealed package, high reliability/
-
Plug and play, include PC control software/
RECOMMENDED PRODUCTS
-
Microchip LasersRealSubns® MCO Series Energy Adjustable Fiber Pigtailed Microchip Laser266-1064nm, 1-200Hz, 10-50μJ, ≤1ns
-
Microchip LasersRealSubns® MCD Series 350ps-2ns Low Repetition Rate OEM Microchip Laser1064nm, 0.01KHz, 200-500μJ, 350-2000ps
-
Microchip LasersRealSubns® MCD Series 350ps Microchip Laser266-1064nm, 0.1KHz, 5-100μJ, 300-350ps