Pulse width down to 1ns
RealSubns® MCJ Series 1ns Microchip Laser
PRODUCT PARAMETERS
Optical Parameters | |||||
Wavelength (nm) | 1030 | 515 | 343 | 257 | |
Repetition rate (kHz) | 1 | 1 | 1* | 1* | |
Average power (mW) | 100 | 40 | 20 | 8 | |
Pulse energy (μJ) | 100 | 40 | 20 | 8 | |
Pulse width (ps) | 1000 | 900 | 800 | 800 | |
Power stabilty (8h) | ±3% | ||||
Beam profile | TEM00 | ||||
Beam full divergence (typ., mrad) | Horizontal @1/e² | 6 | 4 | 3 | 2 |
Vertical @1/e² | 6 | 4 | 3 | 2 | |
Polarization ratio | >100:1 | ||||
System Parameters | |||||
Supply power voltage | 100-240 VAC,50/60 Hz | ||||
Control interface | RS232、USB | ||||
Power consumption (W) | ≤15 | ≤15 | ≤15 | ≤15 | |
Power dimensions (W×H×L,mm) | 180×90×180 | ||||
Laser head dimensions (W×H×L,mm) | 45×33×120 | ||||
Operation temperature (℃) | 15-35 | ||||
Storage temperature (℃) | 0-60 |
1. *Side laser outlet configuration(middle laser outlet configuration unless otherwise stated)
Lasers with repetition rate < 20kHz are positive-edge-triggered, and lasers with repetition rate > 20kHz are gate-triggered.
All systems rely on 5V TTL levels and have SMA interfaces for external triggering input. See mechanical specifications for more details!
2. Built-in beam expander and collimator are available upon request, and divergence can be less than 2mrad.
3. All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the final data is subject to the final test report.
APPLICATION
-
Material micromachining
-
Spectrum analysis
-
LIDAR
-
Pump source
- Biomedicine
KEY FEATURES
-
/
-
Single pulse energy up to 100μJ/
-
Repetition rate up to 2kHz/
-
Spatial mode TEM00/
RECOMMENDED PRODUCTS
-
Microchip LasersRealSubns® MCA Series 1.5ns Microchip Laser266-1064nm, 1-20KHz, 2-120μJ, 1200-2000ps
-
Microchip LasersRealSubns® MCC Series 750ps Microchip Laser213-1064nm, 1-10KHz, 4-100μJ, 650-750ps
-
Microchip LasersRealSubns® MCI Series 2.5ns Microchip Laser473-946nm, 1KHz, 4-20μJ, 2000-2500ps