MCM Series Microchip Laser
MCM series microchip lasers are RealLight’s self-developed, passively Q-switched diode-pumped solid-state lasers, featuring high energy, good value and low power consumption. The integrated design of diode-pumped module and laser crystal results in the compactness. And water cooling is not required for this laser. The MCM series is also available with miniaturized drive boards for OEM control or PD signal for applications include LIBS and laser ablation, which is easy to install and integrate, and is suitable for handheld devices.
Product Parameters
| Optical Parameters | ||
| Wavelength(nm) | 1064 | |
| Repetition rate(Hz) | 10 | |
| Pulse energy (mJ) | ＞10 | |
| Pulse width (ns) | ＜10 | |
| Power stabilty (RMS) | ＜1.5% | |
| Pump pulse width(μs) | ≤250 | |
| Full angle divergence Typ. (mrad) | Horizontal @1/e² | 3 |
| Vertical @1/e² | 3 | |
| Cooling method | air cooling | |
| Laser dimensions (W×H×L,mm) | 17×16.1×58.5(customizable) | |
| Operation temperature (℃) | 15-35 | |
| Storage temperature (℃) | 0-60 | |
| Driver Parameters | ||
| Supply power voltage | 24VDC | |
| Control interface | J30J-15T | |
| Power consumption (W) | 15W（MAX） | |
| *Drive board dimensions (W×H×L,mm) | 90×35×120 | |
| Trigger mode | Trigger In/Out | |
| PD Driver Parameters | ||
| Supply power voltage | 5VDC | |
| Trigger output | SMA connector | |
| Output level | 3V@50Ω | |
| Drive board dimensions (W×H×L,mm) | 39×10×86(customizable) | |
Application
Laser ablation
Laser-induced breakdown
spectroscopy (LIBS)
Key Features
Pulse width < 7ns
Pulse energy up to 20mJ
Built-in PD, drive board for PD available
Compact size, no water cooing required
Suitable for handheld devices
Cost effective
